How To Hang Wallpaper On Textured Walls

How To Hang Wallpaper On Textured Walls

How To Hang Wallpaper On Textured Walls

Understanding the Challenges of Wallpapering Textured Walls

Textured walls add depth and sophistication to your interior décor, but they can pose a unique set of challenges when it comes to wallpapering. It's crucial to understand these potential hurdles before embarking on your wallpapering journey. This will ensure a smooth process and a beautiful outcome.

The problem of uneven surfaces

A major issue when applying wallpaper to textured walls is the uneven surface. This lack of smoothness can lead to bubbles and wrinkles in your wallpaper, compromising the overall aesthetic of your space. The raised patterns on textured walls may also show through the wallpaper, again causing unwanted visual disruptions.

Inadequate Adhesion

Due to the irregularities of a textured wall, wallpaper may not adhere properly. The non-flat surface limits the points of contact between the wall and the wallpaper, resulting in poor bonding. Long-term, this could cause your wallpaper to peel at the corners or come off in patches over time.

Requiring more Materials

Textured walls often require additional primers, adhesive, and more wallpaper than smooth walls. This isn’t just because the texture can increase the surface area somewhat, but also because problematic spots might need a little extra adhesive to get the paper to stick properly.

The difficulty with Patterns

Choosing a wallpaper pattern for a textured wall can be tricky. Intricate designs might become distorted by the wall’s texture, leading to a visual that’s not quite what you intended. Therefore, a substantial amount of care and attention must be given to the wallpaper selection process.

On-Site Adjustments

The unpredictable nature of textured walls may necessitate in-the-moment adjustments. You may find that particular areas need more smoothing or additional paste, or that pieces of wallpaper need to be trimmed differently. Therefore, wallpapering a textured wall can require more time and patience than a smooth one.

Extra Wear and Tear

Over time, the elevated parts of a textured wall may rub against the wallpaper, causing it to wear or tear. This occurs more frequently if the wallpaper is thin or of inferior quality. Therefore, it is always advised to use high-quality, durable wallpaper on textured surfaces.

Tackling the Challenges

Despite these challenges, with the right techniques and products, you can successfully hang wallpaper on textured walls. While it requires more planning and preparation, the end result can be tremendously rewarding, delivering unique visual interest and depth to your room.

Selecting the Right Wallpaper for Textured Walls

Choosing the appropriate wallpaper for your textured walls is pivotal for achieving the desired effect and longevity of the decor. Selecting the right wallpaper involves considering the wall's texture, the material of the wallpaper, pattern, as well as the location of the wall. Here are some factors to consider in detail.

Wall Texture

The depth and type of wall texture significantly influence your wallpaper choice. If the wall has a slight texture, you might have a wider selection of wallpapers to choose from. For heavily textured walls, you'll benefit from a thicker wallpaper that won't display the wall's imperfections.

Wallpaper Material

The material of the wallpaper plays a crucial role in the selection process. For textured walls, vinyl and non-woven wallpapers are excellent choices due to their thickness and durability. These materials can withstand the rough surface of a textured wall, hiding imperfections while staying intact.

Consider the Pattern

Large, bold patterns can make wall texture less noticeable as they naturally distract the eye. On the other hand, wallpapers with small, delicate patterns may end up looking lumpy due to the underlying wall texture.

Color Choice

Color choice can often be overlooked. Generally, wallpapers in lighter shades can expose wall texture more than darker ones, thus, a darker hue can be a smart choice for textured walls as it can make the surface appear smoother.


The location of your walls is also a significant point to consider. For example, wallpaper for a bathroom or kitchen needs specific qualities such as water resistance, which is generally found in vinyl wallpapers.


When in doubt, take samples and test them out on your specific wall's texture. This simple step can save you from potential disappointments after your wallpaper installation.

Professional Consult

Take professional advice if you are uncertain about your wallpaper selection. Professionals can help consider different variables such as light conditions, room's purpose, and your personal taste, to suggest the right wallpaper for your textured walls.

Preparing Your Textured Walls for Wallpaper

Applying wallpaper to textured walls can be challenging due to the irregular surface finish. However, with the right preparation, you can achieve a smooth and professional finish. Below, we go through a detailed process of preparing your textured walls for wallpaper.

Wall Inspection

Your textured wall might have flaws like cracks or loose paint that should be fixed before hanging the wallpaper. Start by inspecting your wall carefully for any damages or irregularities. Small blemishes could become more noticeable after wallpapering and should therefore be repaired in advance.

Patching and Repairing the Wall

Any holes or cracks identified on the wall should be fixed using putty or a joint compound. After applying the compound, ensure it is smoothed out with a putty knife for a level finish. Let the repaired areas dry completely before proceeding to the next step.

Smoothing the Wall

Given the textured finish, consider applying a skim coat of joint compound to the entire wall to create a smoother surface for the wallpaper. The skim coat should be applied in a thin layer using a drywall trowel or a wide compound knife. Allow the skim coat to dry as recommended by the manufacturer.


Once the joint compound is completely dry, start sanding the wall to achieve a smooth finish. Use a sanding pole with a medium-grit sandpaper to efficiently cover the wall surface. Remember to clean the dust off the wall with a damp cloth or a vacuum cleaner.

Applying Primer

Applying a primer to the wall is essential to create a surface that the wallpaper can adhere to effectively. The primer provides a smooth and stable surface, allowing the wallpaper to bond well and reducing the chances of the wallpaper peeling off after installation.

Wall Sizing

Lastly, apply a coat of wallpaper size. Sizes are diluted adhesives that further smooth the wall and create the perfect base for wallpaper. Also, it eases the wallpaper positioning during installation because it slows down the absorption of adhesive, giving you more time to adjust the wallpaper on the wall. Let it dry fully before starting to hang the wallpaper.


Proper wall preparation is a crucial step in achieving a professional-looking wallpaper installation. Take your time to prepare the surface thoroughly, ensuring the wall is in the optimum condition for wallpapering.

Finding the Perfect Starting Point for Wallpaper Application

Before you start to hang your wallpaper, identifying a good starting point is crucial for a professional-looking result. This process can influence the entire project’s outcome. Here’s how to find the perfect starting point for wallpaper application:

Corner Points

For starters, the best place to begin is usually an inconspicuous corner. Corners are typical starting points as they are easier to match with wallpaper patterns, especially for bigger prints. In most cases, an area behind a door or a hidden corner is a great choice to start.

Light Source Considerations

Your starting point should also consider light sources. Starting wallpaper application adjacent to your room’s main light source can help reduce the appearance of seams. This method takes advantage of the light's direction, which is less likely to emphasize the seams from the normal viewing angle.

Straight Vertical Line

Not all corners of rooms are perfectly square, hence, using a plumb line or a level to draw a straight vertical line is a necessary step. This line will serve as your guideline, ensuring that the wallpaper is hung straight, enhancing the overall aesthetics of your room.

Wallpaper Repeat Characteristics

The design of the wallpaper often determines the starting point. For wallpapers with a large pattern repeat, you may want to start in the center of the wall. This ensures that the pattern matches up on either side of the wall and reduces wastage of wallpaper.

Working around Windows and Doors

When planning your starting point, it’s important to think about how the wallpaper will meet at windows and doors. For the best look, you may want to choose a starting point that allows the wallpaper to pass a window or door without a break in the design.

Account for Obstacles

Lastly, keep in mind any fixtures, fittings, or obstacles on the wall. Avoid starting or ending at these points as it makes matching patterns more difficult and cutting around obstacles can result in wallpaper wastage.

By taking the time to identify the best starting point for applying your wallpaper, helping ensure your project goes smoothly and results in a beautifully finished room.

Applying the Adhesive to Textured Walls

Before applying wallpaper, you need to consider the texture of your walls. Textured walls, despite their aesthetic value, can pose difficulty in applying wallpaper due to their uneven surface. Therefore, it's crucial to apply the adhesive correctly to ensure it sticks well and lasts longer. This section seeks to guide you through the steps of applying adhesive to textured walls.

Choosing the Right Adhesive

It all starts with choosing the right adhesive. Ideally, for textured walls, opt for vinyl over clay paste as it's more durable and better suited to follow the contours of textured surfaces. The adhesive should be heavy-duty and specifically designed for use with wallpaper, which can typically be found at most home improvement stores.

Preparing the Wall

Before applying the adhesive, you need to assess your wall's condition. Check for loose paint, wallpaper, or drywall, and remove any remnants to ensure an even surface. This helps in smooth and firm adhesive application. Then, clean your walls thoroughly to remove any dust or debris that can interfere with the adhesive's bond strength.

The Application Process

Stir the adhesive thoroughly and apply it evenly starting from the top of the wall, using a roller or wide brush. Do not flood the wall; instead, apply a medium thickness layer ensuring no spot is left untouched. Pay special attention to edges and corners as these are usually the places where peeling first occurs.

The Waiting Period

After adhesive application, it's crucial to wait a while before hanging the wallpaper. This allows the adhesive to become tacky and ensure a better bond.

Lining the Walls

If you are dealing with a heavily textured wall, it's suggested to line the wall first. This provides a smoother surface for the wallpaper to adhere to. While this step might take some extra time, the result is worth it as it will offer a seamless appearance to your wallpapered textured walls.

Important Tips

Never rush when applying the adhesive to textured walls as this can lead to an uneven application. Remember to smooth out any bubbles or wrinkles before the adhesive dries. Using a wallpaper smoothing tool can be helpful in this process.

Troubleshooting Common Adhesive Problems

Even the most seasoned wallpaper experts sometimes encounter problems with their adhesive not sticking properly. Common issues include edges curling, wallpaper peeling, or adhesive drying out too fast. All these issues can be troubleshooted with patience and the right tools.

The Process of Hanging Wallpaper on Textured Walls

Wallpapering a textured wall can be a bit more challenging than applying wallpaper on a smooth surface. However, with careful preparation and the right materials, anyone can achieve excellent results. The following steps will guide you through the process.

Step 1: Preparing the Wall

Before starting, it is vital to prepare the wall properly. Remove any old wallpaper and repair any damages on the wall surface. Then, you need to smooth out the texture by applying a layer of wall liner or heavy-duty wall sizing. This process will create a smooth surface for the wallpaper to adhere better.

Step 2: Measuring and Cutting the Wallpaper

Measure the height of your walls and add four inches for trimming allowances. Roll out your wallpaper and cut it according to your measurements. Always double-check your numbers before you make the cut to avoid mistakes.

Step 3: Applying Wallpaper Paste

Wallpaper paste is essential for sticking the wallpaper to the wall. Apply a uniform layer of paste over the back of your wallpaper strip. Try to cover every inch of the wallpaper to ensure it sticks to the wall properly.


Pre-pasted wallpapers require a slightly different process; simply apply water, rather than paste, to activate the adhesive.

Step 4: Hanging the Wallpaper

Align the top of your wallpaper with the ceiling, making sure it’s straight, then press the paper onto the wall, starting from the top and working your way down. Use a wallpaper brush to smooth out the wallpaper and remove any bubbles.


It’s a good practice to hang the first strip on a less noticeable area of the room, such as behind a door. This way, if any mistakes happen, they won’t be so visible.

Step 5: Trimming and Cleaning

Once all the wall coverings are up, it's time to trim the excess at the top and bottom edges using a sharp utility knife and a straight edge. Lastly, clean off any leftover adhesive on the wallpaper with damp sponge, and towel-dry afterwards.

Remember – patience is essential when it comes to wallpapering textured walls. With a little bit of practice and the right technique, your walls will look great!

Tips for Smoothing Wallpaper on Textured Surfaces

Adding a wallpaper to textured walls can be tricky, requiring more preparation and technique than with smooth surfaces. In particular, getting that smooth, seamless finish can be a task. However, with the right knowledge and tools, it is entirely achievable. Here's how you can master the art.

Choose Thick, Quality Wallpaper

Thin wallpaper may reveal the textures of the wall underneath, thereby diminishing its visual effect. Opting for thicker, high-quality wallpaper can help provide a smooth finish. Flaws or bumps in the wall will not show through, ensuring your walls look flawless despite their texture.

Preparation Is Key

Start with a clean, dust-free wall, removing any old wallpaper or flaky paint. You might also want to treat any noticeable cracks or holes with filler. Sanding the walls with a rough-grit sandpaper can further reduce the feel of the texture. Remember that the smoother your surface is, the better your wallpaper will stick and look.

Consider Lining Paper

Before hanging the wallpaper, consider applying a lining paper. This can provide an additional layer between the wall and the wallpaper, making the texture less noticeable. Not only does it cover minor surface imperfections, but lining paper also forms a smooth surface for the wallpaper to adhere to.

Perfectly Align Your Wallpaper

Take ample time when measuring and cutting your wallpaper to ensure all parts align perfectly. Misalignments may draw attention to the uneven surface beneath. Use a straight edge and sharp cutting tools to achieve precise cuts and align the wallpaper seamlessly.

The Art of Smoothing

Start smoothing the wallpaper from the center and work your way towards the edges. This technique helps to minimise air bubbles and manage potential creases. A high-quality smoothing tool can assist in getting the smoothest finish.

Care for Your Wallpaper

Once the wallpaper is up, avoid hanging items or placing furniture that could dent or puncture it, particularly in the first few days as it dries. Regular maintenance, including gentle cleaning, can keep the wallpaper looking beautiful and smooth for longer.

The Final Steps and Maintenance of Wallpapered Textured Walls

After successfully applying wallpaper on textured walls, it's pertinent to take note of the final steps to ensure a cumulative elegant finish. Additionally, carrying out periodic maintenance can extend the lifespan of your wallpaper, keeping it vibrant and attractive for a longer time.

Completing the Wallpapering Process

Laying the final piece of wallpaper requires as much precision as the first. Mindfully cut the final piece to size, ensuring that it aligns perfectly with the edge of the wall and the adjacent wallpaper. To ensure all air bubbles are removed, use a wallpaper smoother working from the middle and gently pushing towards the edges.

Upon completion of the wallpapering process, give it some time to dry. Resist the urge to touch, adjust, or attempt to fix imperfections, as this could result in scratches, tears, or misalignment.

Preserving the Wallpaper

Regular care and maintenance are essential in prolonging the life of your wallpaper. Cleaning should be carried out using a vacuum cleaner with a soft brush attachment; this will prevent the accumulation of dust and keep your wallpaper looking its best. Do ensure you avoid using harsh cleaning agents or overly wet cloths to avoid damaging the wallpaper.

Periodic Inspections

Inspect your wallpaper regularly for signs of wear and tear or potential issues such as peeling corners or seams. Immediate resolution of these seemingly minor problems can prevent costly repairs down the line. Should you notice any damage or detachment, it's essential to consult a wallpaper expert for the best remedy.

Room Condition

Keep in mind the conditions of the room where the wallpaper is installed. If the room has high humidity, it's necessary to use a dehumidifier to prevent the wallpaper from peeling. Conversely, in dry conditions, a humidifier can prevent the wallpaper from drying out and cracking.

In conclusion, the process of applying and preserving wallpaper on textured walls requires precision, patience, and regular maintenance. With the appropriate care, your wallpapered textured walls can maintain their beauty and durability for many years.